Smart pss how to setup monitoring to motion detection?

Smart PS (Professional Surveillance System) is a software application that allows users to manage and monitor their CCTV cameras. One of the features of Smart PS is the ability to set up motion detection for monitoring. Here is a detailed guide on how to set up motion detection in Smart PS:

Step 1: Open Smart PS on your computer.

Step 2: Click on the “Device” menu and select “Device Manager” to open the Device Manager window.

Step 3: In the Device Manager window, click on the camera that you want to set up motion detection for.

Step 4: Click on the “Config” button in the bottom right corner of the window.

Step 5: In the Configuration window, click on the “Alarm” tab.

Step 6: Click on the “Motion” button in the Alarm tab.

Step 7: In the Motion Detection window, you can adjust the sensitivity of the motion detection by moving the slider. You can also select the areas of the video that you want to monitor for motion by clicking and dragging on the video preview.

Step 8: To set up the alarm, click on the “Alarm Action” button and select the action you want to happen when motion is detected. You can choose to have the camera take a snapshot, record a video, or send an email notification.

Step 9: Click on the “OK” button to save the motion detection settings.

Step 10: Click on the “OK” button again to close the Configuration window.

Step 11: Click on the “Apply” button in the Device Manager window to apply the changes to the camera.

It’s important to note that some cameras might have different settings and menus, so make sure to consult your camera’s manual or the manufacturer’s website for more detailed instructions.

Also, it’s always a good idea to test the motion detection settings to make sure that it’s working as expected and adjust the sensitivity or monitoring area if needed.

Leave a Comment

Your email address will not be published. Required fields are marked *